labstrobe-handheld-digital-led-stroboscope

LabStrobe™ Pocket LED Stroboscope

  • Compact LED hand-held stroboscope
  • 1400 LUX typical LED output @ 50 cm, 6000 fpm
  • Starting at only $219 and Free Shipping (Online Orders Only)

LabStrobe™ is a hand-held pocket LED stroboscope used to measure the speed of rotation or frequency of vibration of a fan, motor, speaker, other mechanical part or system. The latest in LED technology provides this compact digital stroboscope with unparalleled brightness and battery life at this price point

Stroboscopes have the advantage of not loading or disturbing the equipment under test. Mechanical equipment may be observed under actual operating conditions. Parasitic oscillations, flaws, and unwanted distortion at high speeds are readily detected. The LabStrobe digital stroboscope is ideal for field work, test benches, laboratories, universities and repair facilities.

LabStrobe Purchasing Options




Free UPS Ground shipping on all online orders in the US (lower 48)

Shipments outside the US and Canada will ship via the
US Postal Service and are therefore not traceable.
To arrange alternate shipping methods, call 978-486-4160 or Email.

Order using PayPal or pay as a guest (no PayPal account required)

Distributors Wanted

Labstrobe with tripodLabStrobe

Part Numbers – LabStrobe Pocket LED Stroboscope

 

Part Number Description
STB200-F Rechargeable with microUSB port
STB200-C STB200-F with 18-24 month calibration certificate
STB100-F LabStrobe Digital LED Stroboscope
TP1-F Table top tripod (pictured)
LabStrobe Model STB200-F
Specifications Features
  • » Size: 4.9″ (124mm) x 2.8″ (71mm) x 1.3″ (33mm)
  • » Brightness: 1400 LUX Typical @ 50 cm (19.7″), 6,000 FPM
  • » Seven button membrane for easy operation
    • – Flash rate adjustment ( up, down, X2, ÷2 )
    • – Flash phase adjustment ( 0 – 360° )
  • » Flash Range: 60 -99,990 FPM ( 1 – 1,666Hz )
  • » Minimum flash Duration: 7 µs
  • » Flash Accuracy:
    • +/- 1 LSD ( 60 – 17,300 FPM )
    • +/- .009% ( 17,300 – 99,990 FPM )
  • » Run Time: +20hrs per charge in Bright mode typical
  • » Charge Time: 6 Hrs full charge typical
  • » Charging Supply: 5V, 1A minimum, USB ( not included )
  • » Cell Life: 500 charges ( up tp 10,000 hrs )
  • » Charging Temperature: 32° – 104° F ( 0° – 40° C )
  • » Operating Temperature: 14° – 122° F ( -10° – 50° C )
  • » Weight: 5.6 oz (159 grams)
  • » Lightweight, pocketsize design
  • » Rechargeable
  • » Low battery indicator
  • » Dual mode: Bright / Sharp
  • » Dual high-powered LEDs
    • – No costly lamp to replace
    • – Virtually no heat
    • – Ultra high efficiency for a longer run time
    • – Immune to vibration
    • – Silent operation
  • » Storage bag & microUSB charge cable included
  • » Tripod mountable ( 1/4 – 20 UNC thread )
  • » Optional Tripod ( P/N TP1-F )
  • » RoHS & CE Compliant
  • » Warranty: 2 years
  • » Made in the USA
LabStrobe Model STB100-F
Specifications Features
  • » Size: 4.9″ (124mm) x 2.8″ (71mm) x 1.3″ (33mm)
  • » Power: 3V (2 AA Batteries included)
  • » Brightness: 1400 LUX Typical @ 50 cm (19.7″), 6,000 FPM
  • » Six button membrane for easy operation
    • – Flash rate adjustment (4 buttons)
      • – Coarse: Multiply by 2, divide by 2
      • – Fine: Up & Down (1-15 FPM increments)
    • – Flash phase adjustment (2 buttons)
      • – Up & Down, 0-360° adjustment
    • – Bright / Sharp mode
      • – Bright mode: Maximum light output (1400 LUX Typical at 50cm, 6000 FPM)
      • – Sharp mode: Image viewed will be crisp and the battery life will be increased
  • » Battery life:
    • – Bright mode: 8 Hours Typical
    • – Sharp mode: 17 Hours Typical
  • » Flash rate range in FPM: 60 – 99,990
  • » Flash rate range in Hz: 1 – 1,666
  • » Flash rate accuracy:
    • 60 – 17,300 FPM: +/- 1 LSD
    • 17,300 – 99,990 FPM: +/- .009%
  • » Operating temperature: 14° to 122°F (-10° to 50°C)
  • » Weight: 6.1 oz (173 grams), batteries included
  • » Lightweight, pocketsize design
  • » Low battery indicator
  • » Flash rate recall: On power up, the last flash rate that was displayed
    for 3 seconds or more is shown on the display
  • » Two high brightness LEDs
    • – No costly lamp to replace
    • – No heat generation
    • – Ultra high efficiency, 11 hour battery life typical
    • – Fast response rate
    • – Immune to mechanical shock and vibration
    • – Silent operation
  • » Storage bag included
  • » Hand-held or Tripod mountable (1/4 – 20 UNC thread)
  • » Compliances:
    • – RoHS 6/6
    • – CE – EN55011 Class B: 2004/08/EC
  • » Warranty: 2 years
  • » Made in the USA

 

Additional Information

 

 

Back to top
Follow by Email
Facebook
LinkedIn

Initially designed for our own engineering lab, CRI also offers versatile, low cost test equipment for test benches, laboratories, field work and repair facilities.