SmartFan® Cirrus-ECM – EC Motor Speed Control
Operation / Installation PDF
SmartFan Cirrus-ECM can be used to control one or two EC motors that accept an open collector PWM or 0-12VDC PWM control input. Motor speed is regulated based on a control signal input (0-10 VDC, 0-20mA, remote transducer or remote thermistor). When using a transducer, the Cirrus-ECM can be used to power the transducer up to 18VDC. The Cirrus-ECM motor controller also includes an alarm output indicating motor failure, over temperature or loss of control signal. The alarm signal can be used to power a relay or LED. Control settings including: idle speed, full speed, motor off, alarm trip points and more can be programmed using the SmartFan Navigator or can be configured at the factory for orders as small as 50 pieces.
The SmartFan Navigator PRG00-F menu driven remote programmer can be used to customize any number of Cirrus-ECM controls and can also be used to copy programs from one unit to the next. With 12 programmable variables, the Navigator is one powerful tool. Remote programming provides the ease of menu driven programming while removing the overhead for each control unit and as the Cirrus-ECM cannot be programmed without the Navigator, tampering is never a problem. The Navigator is available for rent or purchase.
|Specifications||Features / Selectable Options|
SmartFan Cirrus-ECM – EC Motor Speed Control Dimensions
For CAD drawings, use the links in Additional Information below.
SmartFan Cirrus-ECM – EC Motor Speed Control Part Numbers
|Part Number||Fan Control Signal|
|ECM2C00-F||Open Collector PWM|
|ECM2V00-F||0-12 VDC PWM|
|DIN350-F||Optional DIN Rail Mounting Kit (click for dimensions)|
|PRG00-F||Navigator Remote Programmer|
To talk to an Engineer or Service Representative, call (978) 486-4160 (9:00 AM – 5:00 PM EST)